Wooting Keyboard Tester
Test every key on your Wooting keyboard instantly. Detect dead keys, chatter, and rollover without installing any software.
Live Key Inspector
WaitingTest Coverage
0%Health Score
Needs CheckSession History
0:00About Wooting
Wooting was founded in 2015 and is headquartered in Amsterdam, Netherlands. Dutch pioneers of analog Hall-effect keyboards — the 60HE and 60HE+ feature Rapid Trigger, adjustable actuation, and the Lekker switch.
Popular Wooting Models
The most popular Wooting keyboards benchmarked on TestMyKey.
| Model | Layout | Switch Type | Price |
|---|---|---|---|
| Wooting 60HE | 60% (61 keys) | Lekker (analog Hall-effect) | $175–$200 |
| Wooting 60HE+ | 60% (61 keys, vintage colors) | Lekker V2 (analog Hall-effect) | $200–$230 |
| Wooting Two HE | Full-size | Lekker (analog Hall-effect) | $200–$230 |
| Wooting 80HE | TKL | Lekker V2 (analog Hall-effect) | $220–$250 |
How to Test Your Wooting Keyboard
- 1
Open the Wootility desktop app (or web app at wootility.io) and check for firmware updates — Wooting releases firmware fixes monthly, and outdated firmware is the #1 cause of analog key issues.
- 2
For each profile you use, run the analog calibration: Wootility → Calibrate → press every key fully down, then release fully up. This resets each Hall-effect sensor's baseline; skipping this causes spurious chatter in our tester.
- 3
Disable Rapid Trigger in Wootility before testing — Rapid Trigger resets actuation on key release, which our tester (and most non-analog apps) interpret as multiple presses. Test in standard digital mode first, then re-enable Rapid Trigger if you need it.
- 4
Press every key in our tester. Each Lekker switch should produce a single clean green flash. If a key flashes red or produces two flashes, the Hall-effect sensor magnet in that keycap has drifted and needs recalibration (or the magnet has physically shifted inside the keycap).
- 5
Hold 6+ keys at once to verify NKRO. Wooting supports unlimited NKRO over USB-C — any dropouts indicate a USB cable issue or a low polling rate setting in Wootility (set to 1000Hz minimum for testing).
Common Wooting Issues & Fixes
Firmware update bricking the keyboard
Wooting's firmware updates occasionally fail mid-flash, leaving the keyboard unresponsive (no lights, no input). DO NOT unplug the keyboard. Fix: open Wootility → Settings → Recovery → Bootloader Mode. Hold the Escape key on the keyboard, plug in the USB-C cable while holding Escape for 5 seconds, then release. Wootility will detect the keyboard in bootloader mode and offer to re-flash the firmware. The 60HE+ and Two HE have a dual-boot partition that makes recovery easier.
Magnetic interference between keys
Each Lekker switch contains a small neodymium magnet. If you press two adjacent keys hard at the same time, the magnets' fields can interfere with each other's Hall-effect sensors, producing false actuations. Test in our tool by pressing adjacent keys (e.g., A and S) hard simultaneously — if one key flashes green when you only pressed the other, that's magnetic interference. Fix: re-calibrate in Wootility (Calibrate tab) with all keys at rest; if it persists, the sensor PCB has a fault and needs RMA.
Custom profile learning curve
Wooting's analog features require custom profiles per game (CS:GO movement, osu! mania, Fortnite building, etc.) configured in Wootility's Tachyon SDK. New users often report 'keys not working' when the real issue is the active profile is set up for analog input that the game isn't reading. Test in our tool first to confirm the hardware works; then in Wootility → Profiles, switch to the default 'Digital' profile to verify normal keyboard behavior before configuring game-specific analog profiles.
Hall-effect sensor drift over time
Wooting's Lekker switches can develop sensor drift after 12+ months as the magnet slowly shifts inside the keycap housing. The symptom is a key that actuates with no finger on it, or produces inconsistent actuation depth in Wootility's analog visualizer. Fix: pull the keycap, press the magnet firmly back into its seat with your thumb, then run Wootility → Calibrate → press each key fully down, then release fully up. Recalibrate every 3–6 months for best results.
Wooting Keyboard Test FAQ
Answers to common questions about testing Wooting keyboards and resolving switch chatter.